@InCollection{MarcianoAlCoLiLoCoTr:2011:DiCaFi,
author = "Marciano, Fernanda Roberta and Almeida, Erica Cristina and Costa,
R. P. C. and Lima Oliveira, Deiler Ant{\^o}nio and Lobo, Anderson
de Oliveira and Corat, Evaldo Jos{\'e} and Trava-Airoldi,
Vladimir Jesus",
title = "Diamond-like Carbon Films Improve their Properties with the
Incorporation of Crystalline Diamond Particles",
booktitle = "Diamond-Like Carbon Films",
publisher = "Nova Science Publishers",
year = "2011",
editor = "Tanaka, Y. S.",
pages = "xxx",
address = "New York",
keywords = "DLC (Diamond-Like Carbon), filmes de DLC, Filmes Finos.",
abstract = "Diamond-like carbon (DLC) has been widely studied due to its
mechanical properties such as low friction coefficient, high
hardness, and high adherence on different substrate materials. The
unique combination of chemical and mechanical properties of DLC
films has opened the possibilities for the electrochemical
applications of these film materials. In this chapter, a review of
DLC films with extremally high hardness and very resistant to
corrosion by incoporating crystalline diamond (CD) particles
during the deposition process will be presented. These films were
for the first time developed in our laboratories and the
characterization performed will be also showed. The studies
carried out in our laboratories show CD-DLC films improving DLC
and stainless steel electrochemical corrosion resistance. CD-DLC
prevented aggressive ions from attacking metallic surfaces,
becoming a potential candidate for an anti-corrosion material in
industrial applications, like pipelines in petroleum industry. It
was also investigated the influence of the diamond particle sizes
on the electrochemical corrosion resistance of these films. The
electrochemical parameters obtained from the potentiodynamic
polarization curves and the impedance were correlationated with
the qualitative sp3/sp2 ratio of the CD-DLC films obtained from
Raman scattering spectroscopy. The results show that both
protection efficiency and impedance increase with the decrease of
ID/IG ratio. It means the increase of sp3 bonds in DLC films
reduce its electrochemical corrosion, improving the
electrochemical protection efficiency and the impedance. In
addition, diamond crystallites bigger than the DLC grain size
reduced the pitting corrosion, which is an indication of the
chemical inertness of the CD-DLC coatings to the Cl\− ions.
The tribological behavior of these films under aggressive solution
was also investigated. The presence of bigger CD particles
increased the film roughness. In addition, these CD particles
demonstrated to reduce DLC friction and wear. CD-DLC(500nm) films
presented the lowest friction coefficient and wear rate under 5%
NaCl saline solution. This result suggests the potential use of
these films in aggressive environment even when suffer friction.",
affiliation = "{Universidade do Vale do Para{\'{\i}}ba (UNIVAP)} and
{Universidade Estadual de Santa Cruz (UESC)} and {} and {} and
{Universidade do Vale do Para{\'{\i}}ba (UNIVAP)} and {Instituto
Nacional de Pesquisas Espaciais (INPE)} and {Instituto Nacional de
Pesquisas Espaciais (INPE)}",
isbn = "9781613247",
label = "lattes: 3455204481678421 1 Trava-AiroldiMaAlCoLiLoCo:2011:DiCaFi",
language = "en",
targetfile = "trava airoldi.pdf",
url = "https://www.novapublishers.com/catalog/product_info.php?products_id=21105",
urlaccessdate = "21 maio 2024"
}